Video
HC-30 CNC Lathe + Two Axes Gantry Loader (Robot)
Specification
| MODEL |
Unit | HC-30 + Gantry Loader |
| Swing over cross bed | mm | 300 |
| Max. turning dia | mm | 250 |
| Max. turning length | mm | 150 |
| X-axis travel | mm | 350 |
| Z-axis travel | mm | 250 |
| X-axis rapid travel speed | m/min | 20 |
| Z-axis rapid travel speed | m/min | 16 |
| Spindle rotating speed | rpm | 50-6000 |
| Bore of spindle | mm | Ø33 |
| Max. bar feeding DIA. | mm | Ø33 |
| O.D. turning tool size | mm | 口20 |
| I.D. turning tool size | mm | Ø20 |
| Cutting coolant volume | L | 120 |
| Cutting coolant pump | HP | 1 |
| Collet type | -- | 163E |
| Spindle motor | KW | 3.75 (5.5 opt) |
| X/Z-axis servo motor | KW | 1 |
| Hydraulic chuck | inch | 5" |
| Horizontal-axis travel | mm | 1985 |
| Up down-axis travel | mm | 740 |
| Horizontal-axis speed | m/min | 90 |
| Up down-axis speed | m/min | 90 |
| Horizontal/Up down-axis servo motor | W | 400 |
| Horizontal/Up down-axis servo driver | W | 400 |
| Apporx. net weight | KGS | 2400 |
| Apporx. machine size(L×W×H) | mm | 2800×1450×2350 |
The above specifications and values are based on Gang-type CNC lathe.
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.
Reference picture
Standard Accessory
3 jaws hydraulic chuck
163E Collet
Auto lubrication system
Base leveling block
Coolant system and chip basket tank with 1HP pump
Cooling & Heat Exchange Unit
Foot switch
Gang type tool plate
Lighting device
No-material alarm indicating lamp
Powerful coolant pump 1 HP
Soft jaw
Tool and tool box
Tool holder bush
Tool holder for inner hole (IDØ20)
Twin tool holder
Upper tool holder & Lower tool holder
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.
Accessory
Feed Station Species:
- Pallet type work feeder station
- Vibration barrel work feeder station
- Rotary lifting work piece station
- And other types of work feeder station, depends on customer's requirement to custom-made.
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.