Video
HCP-42 CNC Lathe with Y-axis side milling device (6-shaft, ER-16)
Specification
| MODEL |
Unit | HCP-42 |
| Swing over cross bed | mm |
300 |
| Max turning dia. | mm | Ø250 |
| Max turning length | mm | 150 |
| Hydraulic chuck | inch | 6" |
| Spindle nose | -- | A2-5 |
| Bore of spindle | mm | Ø45 |
| Max. bar feeding dia. | mm | Ø42 |
| X-axis travel | mm | 350 |
| Z-axis travel | mm | 250 |
| X rapid travel speed | m/min | 20 |
| Z rapid travel speed | m/min | 20 |
| Spindle rotation speed | rpm | 50-6000 |
| O.D. turning tool size | mm | 口20 |
| I.D. turning tool size | mm | Ø20 |
| Coolant tank volume | L | 110 |
| Powerful coolant pump | HP | 1 |
| Collet chuck | -- | 173E/C44 |
| Spindle motor | KW | 3.75 (5.5 opt) |
| X、Z-axis servo motor | KW | 1 |
| Hydraulic turret | POS. | 8 position |
| Approx. machine net weight | KGS | 2300 |
| Approx. machine size(L×W×H) | mm | 2450×1600×2100 |
The above specifications and values are based on Gang-type CNC lathe.
If there are other optional devices, the specifications and values will be different.
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.
Reference picture
Standard Accessory
173E Collet
Auto lubrication system
Base leveling block
Coolant system and chip basket tank with 1HP pump
Cooling & Heat Exchange Unit
Foot switch
Gang type tool plate
Lighting device
No-material alarm indicating lamp
Powerful coolant pump 1 HP
Soft jaw
Tool and tool box
Tool holder bush
Tool holder for inner hole (IDØ20)
Twin tool holder
Upper tool holder & Lower tool holder
Optional Accessory
3 shaft drilling & tapping device
8-position hydraulic turret
Air-Condition unit for electric box
Angle adjustable B-axis device
Bar puller
CE specificatoin (Safety door switch)
Conveyor for parts catcher
Electrical steel belt type chip conveyor
Oil mist collector
Oil Skimmer
Parts catcher
Polygon milling device
Spindle Chuck detection device
Top side single shaft side milling device (ER-20)
Top side single Shaft vertical milling device
Transformer
Voltage stabilizer
Y-axis live tool device with side face 4pcs milling shaft (ER-16)
Disk brake device
Accessory
| MODEL |
Standard accessories | Optional accessories | N/A
|
| A2-5 spindle | ● |
||
| 6" 3-jaw Hydraulic Chuck or Collet Chuck (choose one) | ● | ||
| Soft Jaw or 173E collet (choose one) | ● | ||
| Lighting device | ● | ||
| Tools and tool box | ● | ||
| Coolant system and chip basket tank | ● | ||
| Powerful coolant pump 1HP | ● | ||
| Base leveling block |
● | ||
| Tool holder for inner hole (I.D.Ø20) | ● | | |
| Tool base for inner hole (I.D.Ø20) | ● | ||
| No-material alarm indicating lamp | ● | ||
| Tool holder bush (I.D.Ø6,8,10,12,16 / O.D.Ø20) | ● | ||
| Gang type tool plate |
● | ||
| Auto lubrication system | ● | ||
| Upper tool holder 20口/Lower tool holder 20口/Twin tool holder 20口 | ● | | |
| Tool spacer (up / down) | ● | ||
| Voltage stabilizer | | ● | |
| Transformer |
●
| ||
| Track type electrical chip conveyer | ● | ||
| Oil mist recycle device | ● | ||
| Closed air cooler | ● | ||
| 8-Position hydraulic turret | ● | ||
| Bar-puller (Auto link) | ● | ||
| CE specifications | ● | ||
| Finished-parts collecting device | ● | ||
| Finished-parts collecting device and conveyor belt | ● | ||
| Y-axis side milling device(4-tool)(ER-16) | ● | ||
| Three shaft drilling & tapping device(B-axis) | ● | ||
| C-axis function with disk brake system | ● | ||
| Single shaft side milling device-Top(ER-25) | ● | ||
| Single shaft Vertical type milling device(ER-20) | ● | ||
| Single shaft side milling device-Below(ER-20) | ● | ||
| Oil skimmer | ● | ||
| Syntec 22TA controller | ● | ||
| Fanuc controller | ● |
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.
Workpiece
HCP-42 (Spindle hole 60mm) C axis+side milling device (Y-axis) +3 shaft drilling & tapping device (B-axis drilling small hole) -spare parts of TOTO toilet
HCP-42 (Spindle hole 60mm) C axis+side milling device (Y-axis) +3 shaft drilling & tapping device (B-axis drilling small hole) -spare parts of TOTO toilet
HCP-42 A-axis+B-axis or Y(AB) axis
HCP-42 A-axis+B-axis or Y(AB) axis
HCP-42 A-axis+B-axis or Y(AB) axis
HCP-42 A-axis+B-axis or Y(AB) axis
HCP-42 -stainless steel bar material or barss bar material (ring)
HCP-42+ Y-axis side milling device- material stainless steel 304
HCP-42+ Y-axis side milling device- material stainless steel 304
HC-30 C+side milling device (Y-axis)+3 shaft drilling & tapping device (B-axis)
HCP-42 C+Y-axis side milling device+ B-axis end face milling device
Valve HC-30 or HCP-42 gang type (General turning)
Valve HC-30 or HCP-42 gang type (General turning)
Valve HC-30 or HCP-42 gang type (General turning)
Valve HC-30 or HCP-42 gang type (General turning)
HCP-42 with polygon milling device
HCP-42 with polygon milling device
HCP-42 C+Y axis side milling device
HCP-42 C+Y-axis milling device (drill side hole)-Spare parts for Stethoscope
HCP-42 C+Y-axis milling device (drill side hole)-Spare parts for Stethoscope
HCP-42 C+Y-axis milling device (drill side hole)-Spare parts for Stethoscope