Video
CNC Lathe HC-30
Gang type, Turret type, Rotary tools
Specification
| MODEL |
Unit |
HC-30 |
| Swing over cross bed | mm |
300 |
| Max turning dia | mm | Ø180 |
| Max turning length | mm | 150 |
| X-axis travel | mm | 350 |
| Z-axis travel | mm | 250 |
| X rapid travel speed | min | 20 |
| Z rapid travel speed | min | 20 |
| Spindle rotation speed | rpm | 50-6000 |
| Bore of spindle | mm | Ø33 |
| Max. bar feeding dia. | mm | Ø30 |
| O.D. turning tool size | mm | 口20 |
| I.D. turning tool size | mm | Ø20 |
| Coolant tank volume | L | 120 |
| Powerful coolant pump | HP | 1 |
| Collet chuck | -- | 163E |
| Spindle motor | KW | 3.75 (5.5 opt) |
| X、Z-axis servo motor | KW | 1 |
| Hydraulic turret | POS. | 8 |
| Approx. machine net weight | KGS | 2450×1550×1950 |
The above specifications and values are based on Gang-type CNC lathe.
If there are other optional devices, the specifications and values will be different.
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.
Reference picture
Standard Accessory
3 jaws hydraulic chuck
163E Collet
Auto lubrication system
Base leveling block
Coolant system and chip basket tank with 1HP pump
Cooling & Heat Exchange Unit
Foot switch
Gang type tool plate
Lighting device
No-material alarm indicating lamp
Powerful coolant pump 1 HP
Soft jaw
Tool and tool box
Tool holder bush
Tool holder for inner hole (IDØ20)
Twin tool holder
Upper tool holder & Lower tool holder
Optional Accessory
3 jaws hydraulic chuck
3 shaft drilling & tapping device
8-position hydraulic turret
Air-Condition unit for electric box
Angle adjustable B-axis device
Bar puller
CE specificatoin (Safety door switch)
Conveyor for parts catcher
Electrical steel belt type chip conveyor
Oil mist collector
Oil Skimmer
Parts catcher
Polygon milling device
Single shaft side milling device-Below (ER-20)
Spindle Chuck detection device
Top side single shaft side milling device (ER-20)
Top side single Shaft vertical milling device
Transformer
Voltage stabilizer
Y-axis live tool device with side face 4pcs milling shaft (ER-16)
Accessory
| MODEL |
Standard accessories |
Optional accessories | N/A
|
| 163E Collet | ● |
||
| 5" Hydraulic chuck | ● | ||
| Lighting device | ● | ||
| Tools and tool box | ● | ||
| Coolant system and chip basket tank | ● | ||
| Powerful coolant pump 1HP | ● | ||
| Base leveling block | ● | ||
| Tool holder for inner hole (I.D.Ø20) |
● | ||
| Tool base for inner hole (I.D.Ø20) | ● | ||
| No-material alarm indicating lamp | ● | ||
| Tool holder bush (I.D.Ø6,8,10,12,16 / O.D.Ø20) | ● | ||
| Gang type tool plate | ● | ||
| Auto lubrication system |
● | ||
| Upper tool holder 20口/Lower tool holder 20口/Twin tool holder 20口 | ● | ||
| Voltage stabilizer | ● | ||
| Transformer | ● | ||
| Track type electrical chip conveyer | | ● | |
| Oil mist recycle device |
●
| ||
| Closed air cooler | ● | ||
| 8-Position hydraulic turret | ● | ||
| Bar-puller (Auto link) | ● | ||
| CE specifications | ● | ||
| Finished-parts collecting device | ● | ||
| Finished-parts collecting device and conveyor belt | ● | ||
| Y-axis side milling device(4-tool)(ER-16) | ● | ||
| Three shaft drilling & tapping device(B-axis) | ● | ||
| C-axis function with disk brake system | ● | ||
| Single shaft side milling device-Top (ER-25) | ● | ||
| Single shaft vertical type milling device (ER-20) | ● | ||
| Single shaft side milling device-Below (ER-20) | ● | ||
| Syntec 22TA controller | ● | |
All specifications, dimensions and design characteristics shown in this website are subject to change without notice.
Workpiece
HC-30 Y-axis side milling device
HC-30 Y-axis side milling device
HC-30 Y-axis side milling device
HC-30N or HC-30 General turning
HC-30N or HC-30 General turning
HC-30N or HC-30 General turning
HC-30 with punching device
HC-30 with punching device
HC-30 with punching device
HC-30 Single shaft vertical milling device (hexagonal bar)
HC-30 Single shaft vertical milling device (hexagonal bar)
Door lock HC-30N C+Y+B-axis
Door lock HC-30N C+Y+B-axis
HC-30 Y-axis side milling device
HC-30 C+side milling device (Y-axis)+3 shaft drilling & tapping device (B-axis)
Valve HC-30 or HCP-42 gang type (General turning)
Valve HC-30 or HCP-42 gang type (General turning)
Valve HC-30 or HCP-42 gang type (General turning)
Valve HC-30 or HCP-42 gang type (General turning)